assignment_indRegister
shopping_cart
4S (LHS) Singled Sided Swingarm Stand

These stands have a shaft which is a neat fit into the hollow rear axle of most single sided swing arm bikes. The stands can be fitted with whichever shaft suits the bike it is intended for, and the shaft can be easily changed if the stand is to be used on more than 1 model. The shaft is mounted on bearings and so is free to spin with the wheel if you choose to rotate it.

All our single sided stands are very sturdily built to cope with the cantilevered forces involved in supporting the weight of a bike from one side. They have the most heavily braced frame of any stand on the market. We don't make one stand which will work on both sides of the bike for a good reason - we tried it, but it wasn't stiff enough, because the frame design had to be compromised. to allow it to fit from both sides.

Left handed stands suit the following bikes:
Triumph Daytona, Speed Triple 
Ducati 916, 996, 998, 748, 848, 1098, 1198, Multistrada, Monster S2R, S4R, 796, Hypermotard, Streetfighter, Diavel, Panigale
Honda RVF250, RVF400, VFR400, 750, 800, NSR150, RC30, NR750, CB1000R
MV Agusta
BMW K1200, K1300, R1200GS Watercooled
KTM 1290 Superduke

Right handed stands suit the following bikes:
BMW R1200 - all air cooled models
BMW F800
BMW R nineT

4S (LHS) Singled Sided Swingarm Stand

$395.00
favoriteAdd to Favorites
Add To Cartexpand_lessexpand_more

We pride ourselves on giving the best quality, brands and service. So if for any reason you're not happy with your purchase; contact us and we will do our best to rectify the problem.

Please contact us to find out about the warranty that applies to this product.

Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.