REAR SWINGARM STANDS
FOR BIKES WITH SINGLE SIDED SWINGARMS
These stands have a shaft which is a neat fit into
the hollow rear axle of most single sided swing arm bikes. The stands can
be fitted with whichever shaft suits the bike it is intended for, and the
shaft can be easily changed if the stand is to be used on more than 1 model.
The shaft is mounted on bearings and so is free to spin with the wheel
if you choose to rotate it.
All our single sided stands are very sturdily
built to cope with the cantilevered forces involved in supporting the weight
of a bike from one side. They have the most heavily braced frame of any
stand on the market. We don’t make one stand which will work on both sides
for a good reason - we tried it, but it wasn’t stiff enough, because the
frame design had to be compromised.
CAN YOU USE IT SINGLE HANDED?
Yes, you can - these stands are very easy
to use, as you can fit them in place on the bike while the bike sits on
it’s side stand. When you are ready to lift, simply push the bike upright
and push down on the stand.
MODELS
STANDARD “4S” (Singled Sided Swingarm
Stand)
This stand has 2 wheels which allows for
movement forwards and backwards.
Left-handed 4S holding Ducati 748 (As3030)
|
Left-handed 4S holding Ducati
748 (As3030)
|
R Handed 4S holding F800 BMW - suits several
other models (AS3025)
|
R Handed 4S holding F800 BMW (AS3025) |
Left-handed 4S holding Ducati 748 (As3030)
|
Left-handed 4S holding Ducati 748 (As3030) |
SPACESAVER “6S” (SpaceSaver Single Sided
Swingarm Stand)
Like the Universal Spacesaver, This stand
sits on 3 swivelling dual wheel castors, which allows you to move the bike
in any direction. Great for swivelling the bike around to park it sideways
in the corner of the garage. Or to help shuffle your bike collection around
so you can get to the one in the middle.
The 2 front castors have brakes so you can lock
the wheels.
Left-Handed Spacesaver 6S holding Ducati
748 (AS3108)
|
Left-Handed Spacesaver 6S holding
Ducati 748 (AS3108)
|
We make both the 4S and 6S stands in left handed
and right handed versions.
Left handed stands suit the following bikes:
Triumph Daytona, Speed Triple
Ducati 916, 996, 998, 748, 848, 1098, 1198, Multistrada,
Monster S2R, S4R, 796, Hypermotard, Streetfighter, Diavel
Honda RVF250, RVF400, VFR400, 750, 800, NSR150,
RC30, NR750, CB1000R
MV Agusta
BMW K1200, K1300
Right Handed stands suit the following bikes:
BMW R1200 - all models
BMW F800
We make our right handed stands in both 4S and
6S styles.
DUCATI SHAFT SIZES
There are 2 sizes of shafts used for various Ducati
models:
SMALL SHAFT – this shaft is stepped (has
2 diameters) and will suit: 916, 996, 998, 748, 848, Multistrada (except
the 1200’s) Hypermotard, and Monsters S2R, S4R, 796 and 1100.
LARGE SHAFT – this shaft suits 1098, 1198, Streetfighter,
Multistrada 1200, Diavel and 1199 Panigale
